// Copyright © 2021 Vasily Ovchinnikov <vasily@remerge.io>.
//
// The code in this file is derived from afero fork github.com/Zatte/afero by Mikael Rapp
// licensed under Apache License 2.0.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package gcsfs

import (
	"bytes"
	"context"
	"fmt"
	"io"
	"os"
	"syscall"

	"github.com/googleapis/google-cloud-go-testing/storage/stiface"
)

const (
	maxWriteSize = 10000
)

// gcsFileResource represents a singleton version of each GCS object;
// Google cloud storage allows users to open multiple writers(!) to the same
// underlying resource, once the write is closed the written stream is commented. We are doing
// some magic where we read and and write to the same file which requires synchronization
// of the underlying resource.

type gcsFileResource struct {
	ctx context.Context

	fs *Fs

	obj      stiface.ObjectHandle
	name     string
	fileMode os.FileMode

	currentGcsSize int64
	offset         int64
	reader         io.ReadCloser
	writer         io.WriteCloser

	closed bool
}

func (o *gcsFileResource) Close() error {
	o.closed = true
	// TODO rawGcsObjectsMap ?
	return o.maybeCloseIo()
}

func (o *gcsFileResource) maybeCloseIo() error {
	if err := o.maybeCloseReader(); err != nil {
		return fmt.Errorf("error closing reader: %v", err)
	}
	if err := o.maybeCloseWriter(); err != nil {
		return fmt.Errorf("error closing writer: %v", err)
	}

	return nil
}

func (o *gcsFileResource) maybeCloseReader() error {
	if o.reader == nil {
		return nil
	}
	if err := o.reader.Close(); err != nil {
		return err
	}
	o.reader = nil
	return nil
}

func (o *gcsFileResource) maybeCloseWriter() error {
	if o.writer == nil {
		return nil
	}

	// In cases of partial writes (e.g. to the middle of a file stream), we need to
	// append any remaining data from the original file before we close the reader (and
	// commit the results.)
	// For small writes it can be more efficient
	// to keep the original reader but that is for another iteration
	if o.currentGcsSize > o.offset {
		currentFile, err := o.obj.NewRangeReader(o.ctx, o.offset, -1)
		if err != nil {
			return fmt.Errorf(
				"couldn't simulate a partial write; the closing (and thus"+
					" the whole file write) is NOT commited to GCS. %v", err)
		}
		if currentFile != nil && currentFile.Remain() > 0 {
			if _, err := io.Copy(o.writer, currentFile); err != nil {
				return fmt.Errorf("error writing: %v", err)
			}
		}
	}

	if err := o.writer.Close(); err != nil {
		return err
	}
	o.writer = nil
	return nil
}

func (o *gcsFileResource) ReadAt(p []byte, off int64) (n int, err error) {
	if cap(p) == 0 {
		return 0, nil
	}

	// Assume that if the reader is open; it is at the correct offset
	// a good performance assumption that we must ensure holds
	if off == o.offset && o.reader != nil {
		n, err = o.reader.Read(p)
		o.offset += int64(n)
		return n, err
	}

	// we have to check, whether it's a folder; the folder must not have an open readers, or writers though,
	// so this check should not be invoked excessively and cause too much of a performance drop
	if o.reader == nil && o.writer == nil {
		var info *FileInfo
		info, err = newFileInfo(o.name, o.fs, o.fileMode)
		if err != nil {
			return 0, err
		}

		if info.IsDir() {
			// trying to read a directory must return this
			return 0, syscall.EISDIR
		}
	}

	// If any writers have written anything; commit it first so we can read it back.
	if err = o.maybeCloseIo(); err != nil {
		return 0, err
	}

	// Then read at the correct offset.
	r, err := o.obj.NewRangeReader(o.ctx, off, -1)
	if err != nil {
		return 0, err
	}
	o.reader = r
	o.offset = off

	read, err := o.reader.Read(p)
	o.offset += int64(read)
	return read, err
}

func (o *gcsFileResource) WriteAt(b []byte, off int64) (n int, err error) {
	// If the writer is opened and at the correct offset we're good!
	if off == o.offset && o.writer != nil {
		n, err = o.writer.Write(b)
		o.offset += int64(n)
		return n, err
	}

	// Ensure readers must be re-opened and that if a writer is active at another
	// offset it is first committed before we do a "seek" below
	if err = o.maybeCloseIo(); err != nil {
		return 0, err
	}

	w := o.obj.NewWriter(o.ctx)
	// TRIGGER WARNING: This can seem like a hack but it works thanks
	// to GCS strong consistency. We will open and write to the same file; First when the
	// writer is closed will the content get committed to GCS.
	// The general idea is this:
	// Objectv1[:offset] -> Objectv2
	// newData1 -> Objectv2
	// Objectv1[offset+len(newData1):] -> Objectv2
	// Objectv2.Close
	//
	// It will however require a download and upload of the original file but it
	// can't be avoided if we should support seek-write-operations on GCS.
	objAttrs, err := o.obj.Attrs(o.ctx)
	if err != nil {
		if off > 0 {
			return 0, err // WriteAt to a non existing file
		}

		o.currentGcsSize = 0
	} else {
		o.currentGcsSize = objAttrs.Size
	}

	if off > o.currentGcsSize {
		return 0, ErrOutOfRange
	}

	if off > 0 {
		var r stiface.Reader
		r, err = o.obj.NewReader(o.ctx)
		if err != nil {
			return 0, err
		}
		if _, err = io.CopyN(w, r, off); err != nil {
			return 0, err
		}
		if err = r.Close(); err != nil {
			return 0, err
		}
	}

	o.writer = w
	o.offset = off

	written, err := o.writer.Write(b)

	o.offset += int64(written)
	return written, err
}

func min(x, y int) int {
	if x < y {
		return x
	}
	return y
}

func (o *gcsFileResource) Truncate(wantedSize int64) error {
	if wantedSize < 0 {
		return ErrOutOfRange
	}

	if err := o.maybeCloseIo(); err != nil {
		return err
	}

	r, err := o.obj.NewRangeReader(o.ctx, 0, wantedSize)
	if err != nil {
		return err
	}

	w := o.obj.NewWriter(o.ctx)
	written, err := io.Copy(w, r)
	if err != nil {
		return err
	}

	for written < wantedSize {
		// Bulk up padding writes
		paddingBytes := bytes.Repeat([]byte(" "), min(maxWriteSize, int(wantedSize-written)))

		n := 0
		if n, err = w.Write(paddingBytes); err != nil {
			return err
		}

		written += int64(n)
	}
	if err = r.Close(); err != nil {
		return fmt.Errorf("error closing reader: %v", err)
	}
	if err = w.Close(); err != nil {
		return fmt.Errorf("error closing writer: %v", err)
	}
	return nil
}